Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Chimney Repair in Rockville: What to Know First
Olympia Chimney chimney repair in Rockville typically runs $425-$1,850 depending on what the camera finds, and most of our jobs are completed same-day once we’re on site. We’re an independent Olympia Chimney service provider - not a factory-authorized shop - which means we repair Olympia products and match them with aftermarket parts when the OEM option is overpriced or three weeks out. If you’re in Rockville with a cracked crown, spalling brick, or a leaking flashing on an Olympia Chimney system, call (571) 376-7052 and we’ll put a written price in front of you before any tool leaves the truck.
This page is for Rockville homeowners who own an Olympia Chimney product and need straight answers about repair costs, part availability, and whether it’s actually worth fixing. We name prices in dollars. We explain what the camera showed. And we never recommend a repair we can’t photograph.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney stainless steel liners - pitting at the first flue tile joint. We see this on Olympia’s 316L alloy liners in Rockville homes where the original clay tile has spalled and acidic condensate pools at the first tile joint above the smoke chamber. The liner will look fine for six feet, then show pinhole corrosion right at that seam. Our fix is a targeted liner section replacement or a full reline with DuraFlex if the pitting extends past 40 percent of the liner length. We show you the camera footage so you can see the pitting before you spend a dollar.
- Olympia Chimney chimney caps - mounting brackets tear loose in wind. Rockville gets enough nor’easter-driven gusts that we replace loose Olympia Chimney caps regularly. The issue isn’t the cap itself - it’s the mounting system. Olympia’s standard stainless cap uses a clamp-style bracket that works fine until a 45-mph gust hits it broadside, and then it’s dangling. We secure the replacement with mechanical fasteners, not friction clamps, and we seal the chase edge so water stops following the loose bracket down.
- Olympia Chimney top-mount dampers - cable binds in the frame. We’ve pulled three of these in Rockville just this year. The cable on Olympia top-mount dampers runs through a guide tube that corrodes eventually, and the damper stops seating fully. Symptom: the damper feels stiff, then won’t close at all. The fix is usually a cable replacement and frame lubrication, but if the damper plate itself is warped from heat, the whole assembly comes out and a Copperfield top-mount damper goes in. We stock the parts so this isn’t a two-visit job.
- Olympia Chimney fireplace doors - glass gasket failure at the hinge side. The glass gasket on Olympia’s bi-fold fireplace door line wears unevenly because the hinge side takes all the mechanical load. When it goes, air leaks into the firebox and the burn gets lazy and smoky. It’s a 20-minute fix with the right gasket material, but the wrong material makes the door bind. We use OEM-spec gasket stock cut to the frame, and we verify the door seals with a smoke pencil before we call it done.
- Olympia Chimney chase covers - seam splitting at the corners. This is the failure we see most on Rockville homes built in the 90s and early 2000s. The chase cover was installed as a flat sheet with a folded seam at each corner, and that fold is where galvanic corrosion starts when the chase gets wet. Ten years later, the seam splits and water runs straight down the chase. Our repair is a fabricated stainless replacement with a center peak and a drip edge, which doesn’t hold water the way a flat cover does. We don’t patch chase covers - the patch always becomes the next leak.
Our Olympia Chimney Chimney Repair Process
- 1
You call (571) 376-7052. A live person answers - not a voicemail tree. We schedule a time, and you get a text when the tech is on the way with their name and license number.
- 2
Camera inspection first. The tech runs the Level 2 camera inspection (NFPA 211 standard) on every visit, regardless of what you called about. The footage becomes the baseline for everything we recommend.
- 3
Written price before work starts. We write the scope, the parts list, and the price on paper. If we’re using an aftermarket part instead of Olympia OEM, that’s stated in the writeup with the reason why - usually cost, availability, or both. You decide before we turn a wrench.
- 4
The repair. Our techs are background-checked and uniformed, and they know Olympia Chimney products well enough to know which parts interchange with DuraFlex, Gelco, and Copperfield components. When there’s a genuine advantage to the OEM part, we use it. When there isn’t, we say so.
- 5
Photo record and written warranty. Every job ends with a documented photo record - before, during, after - and a written warranty under the Haven Standard. That’s Clause 4, and it’s been our default since 2009.
- 6
365-Day Done Right Promise. If it’s not done right, we make it right. No fine print, no re-inspection fee. That’s stamped on every job.
BeforeAfterWhat Olympia Chimney Chimney Repair Costs in Rockville
| Repair Type | Typical Rockville Price |
|---|---|
| Crown repair (cracked or spalled) | $425-$750 |
| Flashing repair (leak at roofline) | $450-$1,100 |
| Top-mount damper replacement (aftermarket) | $525-$875 |
| Chase cover replacement (stainless, peaked) | $775-$1,450 |
| Partial brick tuckpointing (per section) | $550-$1,200 |
| Full chimney rebuild above the roofline | $3,500-$6,800 |
What moves the price: access (second-story rooflines and steep pitches cost more), how much of the flue is compromised, and whether we’re matching an OEM Olympia part or using a quality aftermarket equivalent. We carry parts from DuraFlex, HeatShield, Gelco, and Copperfield specifically so you’re never stuck paying a manufacturer markup on a part that has a perfectly good cross-reference. Every estimate is free and written - call (571) 376-7052 and you’ll know the number before you hang up.
Why Rockville Homeowners Call Level Two Chimney Rockville for Olympia Chimney Work
Most of our Rockville customers found us because they got a quote from someone else and wanted a second opinion. That’s a request we’ll always honor - Clause 1 of the Haven Standard says written price, written scope, written warranty, and it says that before anyone starts. We’ve been operating that way since 2009, and in that time we’ve inspected and cleaned over 38,000 chimneys across the Mid-Atlantic. Corrine Halstead, our owner, was running a camera up flues before inspection cameras were common, and she trained this crew to look at the evidence before saying a word about price.
We’re also the crew that will tell you when an Olympia Chimney part doesn’t need replacing. If the camera shows a crown with hairline cracking that’s cosmetic, we say so - and we write that down. We’d rather lose a $700 repair than put a homeowner into work they can’t verify. You get the footage, the written scope, and the price. The camera doesn’t guess. Neither do we.
FAQs
Most Olympia Chimney warranties cover manufacturing defects in the product, not installation-related failures or damage from weather, and most are prorated after the first few years. If you’re in Rockville and have a warranty claim, we can photograph the failure and give you the documentation the manufacturer will ask for - but we don’t handle warranty claims directly. The honest answer: most Olympia Chimney repairs we do are for failures that have outlived the warranty or were caused by water entry, which no manufacturer covers. Call (571) 376-7052 and we’ll tell you which camp you’re in after the camera runs.
We can source Olympia OEM parts when they’re available and when they’re the right call. But we also stock aftermarket parts from DuraFlex, HeatShield, Gelco, and Copperfield that cross-reference to Olympia Chimney components, often at half the price and a quarter of the lead time. We’ll tell you the difference in writing before you decide. The truth is, for most repair scenarios, the aftermarket part is either equal or better - and we’re happy to show you the spec sheets side by side.
Most repairs are completed same-day once we’re on site. We carry a rolling inventory of common Olympia Chimney replacement parts - caps, damper assemblies, gasket stock, chase cover material - so we don’t burn a week waiting on a shipment. If we do need a special-order part, we tell you the lead time in writing before we schedule the work. Call (571) 376-7052 and we’ll give you a realistic window based on what you’re describing.
The camera tells us. If the liner steel still has thickness and the failure is a single component - a cap, a damper, a flashing - repair almost always makes sense. If the camera shows the liner is pitted at multiple joints, or the brick has spalled through the face and the mortar is crumbing, the honest answer is that patching won’t hold. We’ll show you the footage and give you the repair price and the replacement price side by side, in writing, same day. Then you decide with the evidence in front of you. That’s how Corrine runs this shop, and it’s how every tech on our crew is trained.
Every visit includes a camera inspection, regardless of what you called about. It’s NFPA 211 Level 2 standard and it’s been our default since 2009, years before insurers or regulators asked for it. That inspection is how we find the water entry at the flashing when you called about a damp basement smell, or the pinhole corrosion in the liner when you called about a draft issue. We fix what needs fixing and document what doesn’t. That photo record is Clause 4 of the Haven Standard, and you get it on every job.
Call Level Two Chimney Rockville for Olympia Chimney Repairs
We’re at (571) 376-7052, 24 hours a day, seven days a week, answered by a live person. Tell us what’s going on with your Olympia Chimney system and we’ll get a tech out with a camera and a written price. Estimates are always free, and if you have a written quote from another company, bring it - our second-opinion review is free too.
Written by Corrine Halstead, Owner, Level Two Chimney Rockville at Level Two Chimney Rockville, serving Rockville and nearby areas.