Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across McLean
Chimney repair in McLean typically runs $400 to $6,500, with mortar repointing starting around $400 and full chimney rebuilds at the high end. Most repairs on the colonial-era masonry chimneys found off Chain Bridge Road and Georgetown Pike are completed in a single day once parts arrive. The bigger variable isn’t labor. It’s what the camera finds once we’re inside the flue.
Our crews know McLean’s housing stock well: the 1950s brick colonials with original clay-tile liners, the 1980s estates with three fireplaces, and the brand-new infill mansions where a factory-built chimney needs manufacturer-specific care. If you’re searching for Chimney Repair work done right, call (571) 376-7052. We’ll give you a written price before anything starts.
Why Level Two Chimney Rockville Is McLean’s Preferred Chimney Repair Company
Most companies charge you for a flashlight look and call it an inspection. We don’t work that way. Every visit to a McLean home includes a camera scan down the flue under NFPA 211 Level 2 standards, with a photo record you keep. That’s been our default since 2009, not an upsell. Clause 4 of the Haven Standard requires it on every job, from a $250 Chimney Repair in McLean service call to a full tear-out rebuild.
Our reputation around McLean is built on what we hand you before asking for a signature: a written price, a written scope, and a written warranty. Haven Standard Clause 1 means “call for a quote” doesn’t exist here. You get the number on paper, in dollars, before our technicians set up a ladder. Bring us a competitor’s written estimate and we’ll give you a free second opinion on whether the work they’re proposing matches what a camera actually shows.
Background-checked, uniformed technicians arrive with a named tech assigned and a text sent when they’re on the way. Our McLean dispatch is coordinated from the brand’s Washington, DC office, and scheduling is handled by a live person around the clock, not a web form. For an exact quote on your chimney, call (571) 376-7052 now.
Our Chimney Repair Services in McLean

Here’s what we do most often in McLean, and what it costs in this market.
Chimney Relining
McLean’s teardown-era homes often have one thing in common: original clay-tile flues that were never designed for modern wood stoves. When a clay liner cracks or a wood stove has glazed the inside with creosote, we install a DuraFlex stainless steel liner rated for the appliance. Relining in McLean generally runs $2,800 to $6,500 depending on flue height, access, and whether we’re also repairing the crown. A liner is not a brush job. It’s the fix for a flue that’s no longer safe to burn.

Mortar Repointing
Freeze-thaw cycling is the main driver of mortar joint failure on McLean’s older brick chimneys. Water seeps into the joints, freezes, expands, and pops the mortar loose. Repointing those joints costs $400 to $1,200 for a typical residential stack, and the work is far more than cosmetic. Loose mortar lets water reach the brick behind it, and that’s how a $400 repoint becomes an $8,000 rebuild overnight. We tuckpoint rather than smear, matching the original joint profile so the repair blends into the brick.

Chimney Cap Installation
Fairfax County code requires approved chimney caps and spark arrestors. A lot of the grander postwar colonials along Old Dominion Drive still have original uncapped clay flues that never got brought into compliance. Open flues collect oak leaves, acorns, and rain, and raccoons move in. We install Famco caps with spark-arrestor mesh, sized to your flue, for $350 to $700 installed. If your annual sweep finds a cap missing on a wood-burning chimney, it’s worth fixing before the next burning season.

Chimney Waterproofing
Brick is porous. McLean’s winters mean dozens of freeze-thaw cycles every year, and an unsealed chimney absorbs water like a sponge. We apply a vapor-permeable waterproofing treatment (from Olympia Chimney) that stops water intrusion without trapping moisture inside the masonry. Waterproofing a single McLean chimney runs $500 to $1,000. It’s the single best-dollar defense against spalling brick, which is why we recommend it on nearly every masonry chimney we inspect.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in McLean
We stock parts from DuraFlex, Famco, and Olympia Chimney, which means no week-long waits for a liner or cap to ship. When a McLean homeowner needs a reline before the next cold snap, the parts are already in the van. Every material we install carries the manufacturer’s warranty in writing, and every installation is documented with photo records so you know exactly what was done inside the flue. We work on every major brand and condition, from 1960s masonry stacks to modern prefab units that need manufacturer-specific inspection protocols.
Common Chimney Repair Problems We See in McLean Homes

- Third-degree creosote glaze in wood-stove flues. Rural McLean properties that burn wood as a primary heat source run stoves hotter and longer than suburban homes, producing a dense tar glaze inside unlined clay-tile flues that a standard brush can’t remove and that accelerates liner cracking.
- Freeze-thaw spalling on single-wythe masonry. Water-soaked mortar freezes and pops brick faces loose by March, often going unnoticed until a chimney cap inspection reveals structural loss at the crown. A repoint now beats a rebuild later.
- Debris-blocked uncapped flues. Heavily wooded lots drop oak leaves and acorns into uncapped flues, mixing with creosote to form a dense blockage that kills draft and pushes smoke back through the firebox.
- Teardown-era deferred maintenance. Chimneys on demolition-bound properties often sat untouched for decades before our inspection, and what we find inside is sometimes a coin toss between a clean flue and a total reline.
Pricing for Chimney Repair in McLean, VA
Honest numbers, in dollars, before work starts. A typical mortar repointing job in McLean runs $400 to $1,200. Chimney cap installation with a Famco spark arrestor runs $350 to $700. Waterproofing a standard masonry chimney runs $500 to $1,000. A stainless steel DuraFlex reline runs $2,800 to $6,500 depending on flue height and access. What changes the price? Two things: what the camera finds inside the flue, and whether freeze-thaw damage has already reached the brick behind the mortar. You’ll get a written price before any work begins, along with a written scope and a written warranty. Call (571) 376-7052 for an exact quote, free of charge.
We Also Serve Cities Near McLean

Beyond McLean, our crews serve Tysons Corner, Reston, Falls Church, and Vienna. If you own a home in one of those nearby communities and you’re looking for McLean-level camera-scan inspection and written pricing, call the same number. We schedule by neighborhood, not by proximity to an office, which means a Reston or Falls Church job gets the same prompt attention as a job off Chain Bridge Road.
Serving McLean, VA - Our Local Coverage Area
We’re based in the McLean area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in McLean

If the camera shows cracks, gaps, or third-degree creosote glaze inside the clay tile, then yes. A clay-tile flue that’s cracked lets heat and gases reach the surrounding masonry, and a glazed flue is a chimney fire waiting for a spark. Relining is the fix. The cost is higher than a sweep, but it’s the difference between a safe fire and a structural fire. Call (571) 376-7052 for a camera inspection and a written quote.
Every year, before burning season starts. The National Fire Protection Association sets annual inspection as the minimum, and for homes that burn wood as a primary heat source, even that can be a stretch. We recommend a Level 2 camera inspection each fall and Chimney Cleaning & Sweep in McLean whenever creosote buildup reaches one-eighth of an inch or more. On McLean’s wood-stove-heavy rural lots, that usually means every 12 to 18 months, not the 2 to 3 years you might hear for occasional fireplaces.
Freeze-thaw cycling of water inside the masonry. McLean’s Mid-Atlantic climate freezes and thaws dozens of times each winter, and an unsealed brick chimney absorbs water that expands as ice. That pressure pops brick faces and mortar joints loose, especially on the single-wythe chimneys common to 1950s and 1960s colonials. Waterproofing is the defense, and a $500 to $1,000 sealant job now prevents a much larger rebuild later.
Yes, you need a cap, and Fairfax County code requires an approved combination of chimney cap and spark arrestor on solid-fuel-burning flues. If your home has an original uncapped clay-tile flue, it’s out of compliance. Beyond code, an uncapped flue invites oak leaves, acorns, and raccoons into the chimney. A Famco spark-arrestor cap costs $350 to $700 installed and pays for itself in blocked-flue calls avoided.
Sometimes, but not if you’re still living in it and burning. A teardown-bound chimney still has to hold up structurally and draft safely if wood is being burned inside. What we tell McLean homeowners in this situation is simple: if the flue is sound and the brick is stable, a $250 sweep gets you through winter. If the flue is cracked or the crown is failing, a liner or crown repair is still cheaper than the risk of a chimney fire in a house you’re still occupying. Call for a camera inspection and we’ll tell you straight.
Written by Corrine Halstead, Owner at Level Two Chimney Rockville, serving McLean, VA.





Before
After
Before
After